Fiber Optic Communication Technology | EveryEng

Skip to main content

Self-paced Advanced

Fiber Optic Communication Technology

3(115)

107 views

FREE

507 min

Anytime

English

Engineering AcademyLearn Without Limits: Free Engineering Courses

Electrical Engineering

Lifetime access
Certificate of completion
Anytime Learning
Learn from Industry Expert

Volume pricing for groups of 5+

Why enroll

Participants should join this course to clearly understand how modern communication systems and high-speed internet work using optical fibers. The course helps build strong fundamentals through simple explanations of both theory and practical concepts, making it easier to connect classroom learning with real-world applications. It is especially useful for students and professionals in electronics and communication fields who want to strengthen their knowledge for exams, higher studies, or careers in telecom and networking. Delivered as an NPTEL course, it offers structured, IIT-level learning that can be followed at one’s own pace.

Your instructor

Engineering Academy

Engineer

Learn Without Limits: Free Engineering Courses

5+ yrs experience·India

Is this course for you?

You should take this if

You work in Automotive
You're a Electrical Engineering professional
You have 3+ years of hands-on experience in this field
You want to build skills in Engineering & Design, Project Management

You should skip if

You're new to this field with no prior experience
You need a different specialisation outside Electrical Engineering
You need live interaction with an instructor

Course details

Fiber Optic Communication Technology is an NPTEL online course that explains how information is transmitted using optical fibers. The course covers both theory and practical concepts, helping learners understand how optical fiber systems work in real-world communication networks. It focuses on the physical principles and engineering aspects that make fiber-optic communication the backbone of today’s high-speed internet and telecom systems.
Source - Nptel,Noc IITM

Course suitable for

Key topics covered

Learn what optical (fiber) communication is and how it is used to send data at high speed
Understand why optical fiber became important and how it evolved over time
Get clear basics of how any communication system works, from sender to receiver
Learn how light and electromagnetic waves travel inside an optical fiber
Understand the basics of digital communication used in fiber-optic systems
Learn simple modulation methods like OOK, BPSK, and QPSK to send data using light
Know the main parts of an optical communication system and what each part does
Learn how LEDs and laser diodes produce light and transmit information
Understand how optical fibers guide light, what causes signal loss, and why dispersion matters
Get an introduction to optical detectors and amplifiers used to receive and strengthen signals

Course content

The course is readily available, allowing learners to start and complete it at their own pace.

31 lectures8 hr 27 min

Opportunities that await you!

Skills & tools you'll gain

Engineering & Design

Project Management

Research & Developmnet

Career opportunities

FREE

Access anytime

Questions and Answers

Q: You're reviewing a link budget after a DFMEA gate. Field data shows a 3 dB increase in splice loss on a single-mode fiber trunk feeding a camera ECU. While searching "fiber optic splice loss increase causes vehicle camera link margin" you need to decide what actually happens downstream and the correct response before SOP. What should you do?

A: A sounds attractive because 3 dB feels like a power problem and amplifiers are a familiar knob. The miss is that you're injecting ASE noise and masking a process escape; the splice-induced mode field disturbance stays and DFMEA severity doesn't move. C borrows intuition from packet buffering, but optical propagation delay doesn't care about power. D assumes adaptive gain fixes physics; it doesn't, and it ignores vibration-induced BER spikes. B ties the observed loss to BER under real automotive stress and pushes the only response that actually lowers occurrence in the DFMEA.

Q: Your lead asks for a quick calc during a gate review. A 1310 nm single-mode link is 2.4 km long with fiber attenuation 0.35 dB/km, four connectors at 0.5 dB each, and two splices at 0.1 dB each. Transmitter output is +2 dBm, receiver sensitivity is −20 dBm. While googling "fiber optic link budget calculation example with connectors splices" what's the available system margin?

A: A walks through the math cleanly: fiber loss 2.4×0.35, connectors and splices summed once, then +2 minus −20. B feels like plant practice where panels hide losses, but the physics doesn't forgive bookkeeping. C sneaks in an unearned credit; safety factors reduce margin, they don't add it. D is a real DFMEA move for conservatism, yet the question asked for available margin, not a derated one.

Q: A plastic optical fiber (POF) is routed near a power inverter. EMI shielding is specified as a safeguard. While searching "does fiber optic cable need EMI shielding automotive inverter" what does that safeguard NOT protect against?

Q: Post-SOP, vehicles show camera dropout only after car wash exposure. OTDR traces look clean, but insertion loss jumps 1–2 dB until the vehicle dries. You're typing "fiber optic intermittent loss after moisture car wash" and need the root cause that fits all symptoms.