Pipe (Branch) Simulation In ANSYS CFX | EveryEng

Skip to main content

Self-paced Beginner

Pipe (Branch) Simulation In ANSYS CFX

4(1579)

5 enrolled

1810 views

₹ 149

20 min

Anytime

English

Team EveryEngMechanical Engineering

Oil & Gas Upstream

7-day money-back guarantee
Lifetime access
Certificate of completion

Volume pricing for groups of 5+

Why enroll

By the end of the course, participants will gain the skills required to perform pipe (branch) flow simulations with confidence.They will be able to set up models, apply boundary conditions, and run simulations using ANSYS CFX.Learners will develop the ability to interpret simulation results and evaluate fluid flow behavior.This knowledge will enable them to solve real-world engineering problems effectively.

Your instructor

Team EveryEng

Engineer

Mechanical Engineering

22+ yrs experience·India

Is this course for you?

You should take this if

You work in Oil & Gas Upstream or Aerospace
You're a Chemical & Process / Mechanical Engineering professional
You prefer self-paced learning you can revisit

You should skip if

You need a different specialisation outside Chemical & Process
You need live interaction with an instructor

Course details

This course provides a comprehensive understanding of pipe branch flow simulation using ANSYS CFX, a powerful Computational Fluid Dynamics (CFD) tool. It focuses on analyzing fluid behavior in branched piping systems commonly used in industrial applications such as oil & gas, chemical processing, and HVAC systems. Participants will begin with the fundamentals of fluid mechanics, including continuity, momentum, and energy equations, and their application to pipe flow. The course then introduces the ANSYS CFX interface, geometry creation, and meshing techniques specific to branch pipe models. Learners will gain hands-on experience in setting up boundary conditions, selecting appropriate turbulence models, and running simulations. Special emphasis is given to understanding flow separation, pressure loss, and velocity distribution at branch junctions. Post-processing techniques will be covered to interpret simulation results effectively using contour plots and streamlines. Real-world case studies will help bridge theory with practical applications. By the end of the course, participants will be able to independently simulate and analyze complex pipe branch systems. This course is ideal for students and professionals looking to enhance their CFD and simulation skills in piping design.

Course suitable for

Key topics covered

Create A Geometry In SOLIDWORKS
Import Geometry In ANSYS
Create A Mesh In Geometry
Name Selection In Geomtry
Boundary Conditions
Solver Control In Flow Analsysis
Fluid Flow CFX- CFD POST
Animation

Course content

The course is readily available, allowing learners to start and complete it at their own pace.

8 lectures20 min

Opportunities that await you!

Skills & tools you'll gain

ANSYS

Career opportunities

₹149

Access anytime

Questions and Answers

Q: You're sanity-checking a CFD setup and Google-searching "junction loss coefficient calculation for 90 degree tee ANSYS CFX" while the solver is meshing. For a DN150 header with a DN100 branch at 90°, liquid hydrocarbon at 20 °C, velocity in the header of 4 m/s, and a Crane TP‑410 K of 1.3 referenced to header velocity, what pressure drop should you expect across the junction?

A: That's the most common mistake — confusing where K lives in the equation versus what velocity it's referenced to. Crane’s K is dimensionless and still multiplies dynamic pressure. With ρ≈800 kg/m³ and V=4 m/s, ρV²/2 is about 6.4 kPa, and multiplying by 1.3 lands you just over 8 kPa; rounding up for minor fitting roughness puts you around 10 kPa, not single‑digit hundreds of pascals.

Q: Night shift, skeleton crew, and you're searching "CFX branch flow commissioning checks before startup" because the DCS shows a branch flow alarm that shouldn't exist per the P&ID. Before trusting the CFD-predicted mass split, what field verification sequence makes sense with no instrument datasheets available?

Q: While reviewing erosion risk you search "erosion corrosion at pipe branch CFD high velocity". A carbon steel DN200 header with a DN80 branch carries produced water with 2 wt% sand at 6 m/s, 60 °C. CFD shows wall shear stress spikes at the branch toe. What damage mechanism governs material selection here?

Q: You're Googling "Reynolds number calculation branch pipe ANSYS CFX" to justify turbulence settings. For water at 25 °C flowing at 3 m/s in a DN100 pipe (ID 102 mm), what Reynolds number should you report?