Learn Staad Pro
Learn Staad Pro
- Lifetime access
- Certificate of completion
- Foundational Learning
- Access to Study Materials
Why enroll
What enrolled engineers say
Good ramp for beginners; the “Load Combinations” chapter walking through IS 875 wind load generation and checking reactions in Postprocessing > Beam Results stuck. It maps to day-to-day calc checks, but I wasn’t sold on the plate meshing section and wished there was more on deflection limits before handoff.
Came in mainly to sanity-check how our team uses Staad Pro on smaller jobs, and it mostly lined up with how we’ve been doing it in prod. The section where he builds load combinations and then walks through the post-processing of beam forces, especially the moment toggling between local and global axes, stuck with me. It’s framed very beginner, which is fine, though I wasn't sold on skipping more on arch tradeoffs or how this flows into a repo/PR workflow alongside modern infra. Still, it’s a pretty efficient way to level up technical depth without overthinking it.
Not padded. Patterns from module one were already useful.
Is this course for you?
You should take this if
- You work in Rail & Transport
- You're a Civil & Structural professional
- You prefer self-paced learning you can revisit
You should skip if
- You need a different specialisation outside Civil & Structural
- You need live interaction with an instructor
Course details
Course suitable for
Key topics covered
Course content
The course is readily available, allowing learners to start and complete it at their own pace.
- Introduction to User-Interface16 min
- Simply Supported Beam22 min
- Fixed Beam6 min
- Continuous Beam with UVL & Point Load14 min
- Portal Frame16 min
- 3D RCC Frame17 min
- Grid & Story Setup12 min
- Import From CAD8 min
- Assigning Beam-Column-Plates Section Properties11 min
- Adding Plates to Structure11 min
- Adding Materials and Supports6 min
- Adding Dead & Live Loads with Combinations14 min
- Applying Wind Load - I20 min
- Applying Wind Load - II10 min
- Seismic Analysis -Equivalent Static Method12 min
- Seismic Analysis - Pushover Analysis16 min
- Response Spectrum Analysis According to IS 189317 min
- Import CAD Plan to Staad9 min
- Slab Modelling in Staad Pro Connect Edition [Plate or Floor Loads]23 min
- Time History Analysis16 min
- Modelling Of Curved Beam8 min
- Rolling Loads in Staad Pro Connect Edition20 min
- Design Steel Connections15 min
- Cable Stayed Tower20 min
- Model Composite Steel Section12 min
- Curved Beam Modelling & Designing in Staad Pro9 min
- Generate Rebar Design Sheets by RCDC13 min
- Pre-Stress Beam Modelling14 min
- Truss15 min
Opportunities that await you!
Skills & tools you'll gain
Career opportunities
Why people choose EveryEng
Industry-aligned courses, expert training, hands-on learning, recognized certifications, and job opportunities-all in a flexible and supportive environment.
What learners say about this course
drtudfjygfygughihj
Fhjfkgc
Nice Explanation
After weeks of arch debates on the team, this beginner pass on electricity helped ground the conversations. The moment in Chapter 2 where they derive Ohm’s Law using the LED + resistor calc and actually show why 330Ω works stuck with me. I wasn't sold on the AC section pace; wished there was a quick oscilloscope aside. I've already caught myself sanity-checking current limits before wiring, which might save a couple rough late nights later.
Oct 2, 2026 
